简体中文
Basic Info.
| Model NO. | JC25 | Certification | TUV, ISO, CE |
|---|---|---|---|
| Condition | New | Rated Load | <1t |
| Transmission | Hydraulic | Load and Unload Mode | Front Discharge |
| Walking Mode | Wheeled | Type | Small Loader |
| Driven Type | 4WD | Engine Power | 18.7kw |
| Bucket Capacity | 0.2cbm | Dumping Height | 1920mm |
| Engine Brand | Kubota/Yanmar | Tandem Pump | Eaton |
| Hydraulic Motor | Eaton | Specification | 2880*1880*2160mm |
| Trademark | LY | Origin | Shandong |
| HS Code | 8429510000 | Production Capacity | 600 Units Per Year |
Dimensions of JC25 skid steer loader
| Code No. | Item | JC25 |
| A | Loader operation height | 3590mm |
| B | Height to bucket hinge pin | 2650mm |
| C | Maximum height to the cab top | 2050mm |
| D | Height to bucket bottom | 2470mm |
| E | Total length without accessory | 2430mm |
| F | Total length of the loader with standard bucket | 3170mm |
| G | Unloading angle when bucket is at the highest level | 40° |
| H | Discharging height (the moving arm is completely lifted) | 1920mm |
| J | Discharging distance (the moving arm is completely lifted) | 720mm |
| K | Rollback angle of the bucket to the ground | 30° |
| L | Bucket Rollback at Full Height | 104° |
| M | Wheel axle | 801mm |
| P | Clearance above ground level | 180mm |
| Q | Departure angle | 20° |
| R | Front turning radius (without bucket) | 971mm |
| S | Front turning radius (the bucket is on the ground) | 1681mm |
| T | Rear turning radius | 1371mm |
| U | Tail length | 940mm |
| V | Wheel tread | 882mm |
| W | Total width (tire edge) | 1371mm |